Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser designed for CAN buses. It's discrete, doesn't employ keys or LEDs and is hidden within the vehicle's wiring.
The user can also deactivate the system for a short period of time by using Transport Mode when renting their car. Highly recommended Website will take you through the process of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car against key hacking attacks, cloning and relay attacks. The system is linked directly to the ECU of your vehicle and protected by a PIN code you set. It's undetectable to thieves using diagnostic scanners or other advanced methods, and is not able to be disabled by circuit cuts.
The system is easy to use, but it is essential to have a an expert installation to ensure a secure and secure connection to your vehicle's ECU. A Thatcham-approved installer can help in the installation and programming of your Ghost system. They can also recommend a tracking system or alarm to complete your vehicle's security package.
The first step is to disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. After this is completed the installer is now able to begin work. Basic hand tools can be used for precise connections. A multimeter is a great tool to test electrical values. Cable ties and insulation tape are also vital for protecting connections and keeping wiring tidy. The Ghost Immobiliser user's manual will provide specific instructions tailored to your model.
During the installation process, it's crucial to select an area for grounding that is free of paint and debris. Installers should also ensure that the immobiliser's wires, CAN H and CAN L are connected to the appropriate ECU ports. The wires can be plugged in or soldered based on the model. A high-quality connector is recommended to ensure a long-lasting and secure connection.
After the installation is completed, the customer can activate the Transport Mode. This allows the vehicle to be used by valet parking attendants or mechanics without needing to know the pin code. The user must press the service icon on the dashboard five times within 2 seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's an excellent choice for those who rent out their vehicles often on platforms such as Turo. An immobiliser can cut down on insurance rates, as it decreases the likelihood of theft.
Getting Started
You won't have a problem with an autowatch immobiliser in order to guard your car from theft. The device protects your vehicle from starting even the theft or copies the key. It's possible due to its advanced technology, which prevents the engine from starting until the right PIN code has been entered.
The device works by connecting to the vehicle's CAN bus network and allowing it to communicate with the ECU directly. It uses the buttons on your dashboard and steering to create a unique sequence, that only you can understand. This makes it impossible for anyone else to start your car. This is the ultimate system to protect your pride and joy. It will not lose its value should you ever decide to sell it.
Installing a ghost immobiliser can be a simple process, but it's important to follow the instructions carefully to avoid electrical issues and system malfunctions. First, you must find a 12V power source and a suitable grounding for the car's chassis. Then, you'll be able to begin connecting the wires to the immobiliser. Use high-quality connectors and soldering techniques for a secure connection. Also, be sure to insulate the connections with heat shrink tubing and insulation tape to protect them from short circuits in electrical power and other problems.
After the wires are connected, you are able to connect the battery and start the engine to test whether the immobiliser works. After you've confirmed that everything is working correctly, you can install the immobiliser in a safe location in the vehicle. Make sure you hide it in a secure manner to prevent thieves from getting into it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified this means it meets the highest standards of security and is a fantastic protection against car thieves. It is impervious to key cloning and hacking and is not able to be disabled without the code. The device is easy to use, and it can be set to an option for a service valet so that your vehicle will not be activated if you take it for an MOT or servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's designed to stop theft of vehicles. It connects directly to your car's CAN bus network and communicates with the ECU, making it virtually undetectable to your car. The Ghost Immobiliser will not interfere with the factory settings of your car, unlike other aftermarket systems which require the removal of circuit elements.
The system is also unnoticeable by thieves using diagnostic scanning tools. This is because the system doesn't send and receive radio frequency signals and it relies on CAN data to communicate with your ECU. Additionally, it doesn't require any modifications to your vehicle's existing key fobs.
To use the Ghost Immobiliser, simply switch on the ignition in your car and enter your disarm sequence (either one or two buttons). The indicator will flash two times to verify that you have entered the correct code. After this, you can start your vehicle and leave with peace of mind.
Once installed, the Ghost Immobiliser guards your vehicle from hacking or key cloning while protecting its value. If you ever need to surrender your vehicle to a valet or service provider The Ghost Immobiliser can be temporarily disabled in Transport Mode.
To complete a Ghost Immobiliser installation, you'll need locate an energy source that is constant (12V) and an earthing point. Ensure that these are both well-insulated and safe to touch. It's also recommended to use cable ties to bundle and secure the wires, since this reduces the risk of being tampered with by thieves. To avoid mistakes, double-check these points and mark them with a label or tape. It's also a good idea to inspect all connections for signs of wear and tear. Loose connections can lead to malfunctions in the system, so make sure they're securely in place and properly insulated. Don't forget to test the Ghost Immobiliser after the installation is completed. This will make sure that the unit is working correctly and that all connections and insulation are secure. Make sure to address any issues immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that works seamlessly with your car's ECU to stop unauthorised motor starting. Its innovative technology protects your vehicle from key cloning, hacking, and other typical tactics thieves employ to steal vehicles. The Ghost is also able to work in conjunction with other alarm and tracking systems to give the best protection for your vehicle. The Ghost's unparalleled features, coupled with its discreet design makes it a preferred option for both car enthusiasts and security conscious drivers.
It is crucial to follow the steps of installation in order to ensure the complete integration of the Ghost Immobiliser. The best way to begin is to look over the wiring diagram for your vehicle, which will serve as a roadmap for locating and connecting the necessary wires. After that, you'll need identify the power source as well as grounding points. Once you've found them, you will have to mark them so that they are easy to identify when installing. It's important to use high-quality materials and tools. Basic hand tools can assist to make precise connections and a multimeter can confirm electrical values and guarantee safety. Insulation tape and cable tie ensure that all connections are neat. A Ghost-specific user's guide is also available.
Before proceeding with the installation, it's important to test the system by entering the PIN code and then starting the vehicle. This step will confirm that the immobiliser functions in the way it was intended, preventing unauthorized vehicle starts. It's recommended to perform this step regularly as part of your routine inspections of your vehicle to ensure that the system is working properly.
Once the installation has been completed, you can start driving your car with confidence. The Ghost will protect your pride and joy from would-be car thieves. It will ensure that no one will take your car away if they do not have the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that identifies any attempts to steal or tamper with. This will allow you to locate your car if it's stolen.
The Ghost is compatible with a wide variety of vehicles, including those from the majority of major manufacturers. Monty's Locksmith can help you secure your vehicle with this cutting edge device. Contact us today to find out more about our service and installation options. We are a TASSA Installer who is registered, a certification that guarantees that we adhere to strict guidelines and procedures for installing our products. This assures customers, insurance companies and law enforcement agencies that installations are done safely and correctly.